Infra Suite 2010 is a collection of applications that need for civil engineering works. It specially designed for Civil and Structural Engineers.

Speed of Change...
Ready your design with drawings before other...

Output layout in CAD*
Output sections in CAD*
Design Calculation

*WR, DNAAD, SNAAD and EC only


Want to learn more! Kindly go to our FAQ

2nd Generation of USD. This application is specially written for Urban Stormwater Management Manual for Malaysia (MSMA).
USD simpifies the application of MSMA by automating computations and leading the user through the drainage design sequence involving:

 

Now, it is come with run a design in a single click.

For your information, our new version of URBAN STORMWATER DESIGN VERSION 2.0(USDV2) has been re-invented with a great improvement on especially in pond design. USDV2 further improve on the productivity of design process and more AUTOMATION on design.

It still offer with basic features as follow:

Simulation in level pool routing based on inflow and outflow.

IDF curves and design rainfall

Rational Method

Rainfall Temporal Pattern

Time Area Method

On-site Detention (OSD)

Level Pool Routing

And it comes with new features:

• New graphical interface
• Multiple storm events.
• Multiple rain duration
• CAD support for pond area
• Auto pond area in CAD for storage outflow function
• Auto pond sizing design
• Control pond design depth
• New OSD with outflow
• Auto post Q check for pond design
• Shorten design time for pond design
• Enrich graphs presentation
• Auto coefficient C value for Manning equation.

Click here for screen shots V1.0


WaterRec is a software for water network system. It runs in loop or branch system. It uses pupular method that named as Hardy Cross for loop system and junction method for branch system.

Hardy Cross method for loop system or junction method for branch system. It gathers general water supply layout.

Graphical input. Nodes and pipes are input in graphical mode.

Output directly to printer.

Input unit can be in imperial unit or SI unit. It provides unit in l/s, cfs, gpm and cu.m/s.

It gathers for average flow and peak flow of water reticulation. The flow factors are automatically computed during the analysis.

Automation error messaging on water reticulation software.

CAD import/export layout. Software can read water supply network for CAD drawing with special add on to *CAD application.

Special add on hydrant input. During input, user does not need to add hydrant flow value into inflow and outflow at node.

Export to Excel file format. Easy conversion to any preferred design report format.

Drainage Networks software is a simple civil engineering software that performs the computation of drain sections and inverts levels.

Simple spread sheet formats.

Calculate sizing, levels and gradients.

Generate cross sections file in DXF format.

Easy input, fast output

MSMA(Malaysia only)

Quantities computation

Cad* input and output

Data file can export to Excel file

Screen shots Drain Network Analysis and DesignGoto

This application is a simple civil engineering software that performs the computation of sewers sizing and inverts levels.

Simple spread sheet formats.

Calculate sizing, levels and gradients.

Generate cross sections file in DXF format.

Easy input, fast output

IWK(Malaysia only)

Quantities computation

Cad* input and output

Data file can export to Excel file

Screen shots Drain Sewer Analysis and DesignGoto


This application is a simple civil engineering software that performs the earthworks quantities in grid system or cross section system.

Cut and fill layout for Grid system method. Export to CAD*.

Grid system and cross section method

Calculate cut/fill and total volume.

Generate cross sections file in DXF format.

Graphical display.

Also suitable for developers and earthworks contractor.

CAD* input

Screen shots Earthworks ComputationGoto


This application is a simple engineering software that draws longitudinal section by providing coordinates in DXF form. Specially for draft person.

Draw cross section drawing by input coordinates.

Generate output in DXF format.

Data manipulation such as changes level and set gradient.

For draft person.

All the above civil engineering software required Microsoft .NET framework 3.5

If you interest to the above civil engineering software, you may get the download by email to  sales@civilstructural.com.my  together with your particular. Currently the TRIAL is available for USD software only 

If you need civil engineering software demostration, we can arrange sales person to perform DEMOSTRATION to the zone of Wilayah Persekutuan(Kuala Lumpur), Selangor, Negeri Sembilan and Melaka in Malaysia. 

Location others than mention above will forward a copy of Trial version of civil engineering software.

Information

We will provide you  DEMO/Trial Version of engineering software if you give us complete particulars...

*CAD applications supported are AutoCAD 2004 or later, Bricscad V9.0 Professional Version or later. The workability of CAD applications may varies from type of CAD applications used.
In order to run CAD interlink feature, user needs to has a separate CAD application.